Lenovo ThinkStation P330 Скачать руководство пользователя страница 58

Страница: 58 / 134

• To work with another piece of hardware, go to the appropriate section.

• To complete the installation or replacement, go to “Completing the parts replacement” on page 89.

2.5-inch storage drive

To remove or install a 2.5-inch storage drive, do the following:

1. Before removing an old 2.5-inch storage drive, safely eject the old storage drive from the operating

system first. For more information, see the operating system help system.

2. Unlock the enclosure cover with the provided key as shown. Press the notch

to open the enclosure

cover.

Figure 51. Opening the front-access storage enclosure cover

3. Press the pit on the bracket cover, and then grasp the tilted cover to pull the bracket out of the front-

access storage enclosure.

Figure 52. Removing the bracket from the front-access storage enclosure

4. To remove the 2.5-inch storage drive, do the following:

a. Flex both sides of the bracket to remove the 2.5-inch storage drive from the bracket.

Figure 53. Removing the 2.5-inch storage drive from the bracket

P330 User Guide

Содержание ThinkStation P330







































































































































Результаты поиска

Содержание ThinkStation P330

Отзывы:

Похожие инструкции для ThinkStation P330

Бренды по названию

Популярные бренды

Lenovo ThinkStation P330, Руководство пользователя

Результаты поиска

Содержание ThinkStation P330

Отзывы:

Похожие инструкции для ThinkStation P330

Бренды по названию

Популярные бренды