Lenovo ThinkStation P330, Руководство пользователя

Страница: 44 / 134

b. Pull the handle of the retention latch outward to the open position. The M.2 solid-state drive is
released from the secured position and pivots upward. Remove the M.2 solid-state drive out of the
slot.
Figure 27. Opening the retention latch and removing the M.2 solid-state drive
5. To install a new M.2 solid-state drive, do the following:
a. If necessary, align the four tabs on the rear of the plastic holder with the corresponding holes in the
chassis. Then slide the plastic holder toward the system board until it snaps into position.
Figure 28. Installing the plastic holder
38
P330 User Guide