Lenovo ThinkStation P330, Руководство пользователя

Страница: 47 / 134

• To complete the installation or replacement, go to “Completing the parts replacement” on page 89.
M.2 solid-state drive in an M.2 solid-state drive PCIe adapter
To remove or install the M.2 solid-state drive in the M.2 solid-state drive PCIe adapter, do the following:
1. Prepare your computer. See “Preparing your computer” on page 24.
2. To remove the M.2 solid-state drive in the M.2 solid-state drive PCIe adapter, do the following:
a. Locate and remove the M.2 solid-state drive adapter from the PCIe card slot.
b. The heat sink is secured by two mounting studs. Pinch the clips of the studs inward 1 and push the
studs upward 2 to release the heat sink. Then, lift the heat sink off the M.2 solid-state drive adapter
3 .
Figure 33. Removing the heat sink from the M.2 solid-state drive adapter
c. The M.2 solid-state drive is secured by a retention latch. Pull the handle of the retention latch
outward to release the M.2 solid-state drive. Then, gently pull the M.2 solid-state drive out of the M.2
slot.
Figure 34. Removing the M.2 solid-state drive
3. To install the M.2 solid-state drive, do the following:
Chapter 6
.
Hardware removal and installation
41