Lenovo ThinkStation P330, Руководство пользователя

Страница: 43 / 134

An M.2 solid-state drive can be installed on the system board or an M.2 solid-state drive PCIe adapter.
M.2 solid-state drive on the system board
To remove or install an M.2 solid-state drive on the system board, do the following:
1. Prepare your computer. See “Preparing your computer” on page 24.
2. Locate the M.2 solid-state drive slot.
3. Untie the cables that prevent your access to the M.2 solid-state drive slot from the cable clip.
4. To remove an M.2 solid-state drive, do the following:
a. Turn the two mounting studs 90-degree counterclockwise to release the heat sink. Then, lift the heat
sink off the plastic holder.
Figure 26. Removing the heat sink from the plastic holder
Chapter 6
.
Hardware removal and installation
37