Lenovo ThinkStation P330 Скачать руководство пользователя страница 121 | Manualshive

Страница: 121 / 134

background image

Appendix D. Compliance and TCO Certified information

This chapter provides regulatory, environmental, RoHS, and ENERGY STAR information about Lenovo
products.

Radio frequency compliance statements

Computer models equipped with wireless communications comply with the radio frequency and safety
standards of any country or region in which it has been approved for wireless use.

Besides this document, ensure that you read the

Regulatory Notice

for your country or region before using

the wireless devices contained in your computer.

Locate wireless regulatory notices

For more information about the wireless regulatory notices, refer to the

Regulatory Notice

at:

https://pcsupport.lenovo.com

European Union-compliance with the Radio Equipment Directive

•

For computer models with wireless radio devices:

This product is in conformity with all the requirements and essential norms that apply to EU Council Radio
Equipment Directive 2014/53/EU on the approximation of the laws of the Member States relating to radio
equipment. The full text of the system EU declaration of conformity is available at:

https://www.lenovo.com/us/en/compliance/eu-doc

Lenovo cannot accept responsibility for any failure to satisfy the protection requirements resulting from a
non-recommended modification of the product, including the installation of option cards from other
manufacturers. This product has been tested and found to comply with the limits for Class B equipment
according to European Standards harmonized in the Directives in compliance. The limits for Class B
equipment were derived for typical residential environments to provide reasonable protection against
interference with licensed communication devices.

•

For computer models without wireless radio devices:

The full text of the system EU declaration of conformity is available at:

https://www.lenovo.com/us/en/compliance/eu-doc

Lenovo cannot accept responsibility for any failure to satisfy the protection requirements resulting from a
non-recommended modification of the product, including the installation of option cards from other
manufacturers. This product has been tested and found to comply with the limits for Class B equipment
according to European Standards harmonized in the Directives in compliance. The limits for Class B
equipment were derived for typical residential environments to provide reasonable protection against
interference with licensed communication devices.

Brazil

Este equipamento não tem direito à proteção contra interferência prejudicial e não pode causar interferência
em sistemas devidamente autorizados.

This equipment is not protected against harmful interference and may not cause interference with duly
authorized systems.

© Copyright Lenovo 2020

115

«
...
119
120
121
122
123
...
»

Содержание ThinkStation P330







































































































































Отзывы:

Нет отзывов

Похожие инструкции для ThinkStation P330

Бренд: IBM Страницы: 721

Бренд: Olivetti Страницы: 111

Бренд: IBM Страницы: 2

Бренд: IBM Страницы: 121

CRM Point CRM-P

Бренд: Ubiquiti Страницы: 24

Бренд: Aaeon Страницы: 88

Бренд: Oceanic Страницы: 80

Бренд: Büttner Elektronik Страницы: 36

Бренд: Quanmax Страницы: 34

Бренд: Aplex Страницы: 77

Бренд: Asus Страницы: 18

Бренд: Asus Страницы: 174

Бренд: Asus Страницы: 166

Бренд: Winmate Страницы: 60

Бренд: Winmate Страницы: 92

ProDesk 400 G7 SFF

Бренд: HP Страницы: 10

Бренд: HP Страницы: 2

ProDesk 400 G2.5

Бренд: HP Страницы: 9

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды