Lenovo 7Z70 Скачать руководство пользователя страница 24

Страница: 24 / 212

Table 2. Events organized by severity (continued)

Event ID

Message String

Severity

FQXSPPW0007I

Power supply [arg1] in the enclosure/chassis (MTM-SN: [arg2])has
lost input.

Warning

FQXSPPW0031J

Numeric sensor [NumericSensorElementName] going low (lower non-
critical) has asserted.

Warning

FQXSPPW0057J

Sensor [SensorElementName] has transitioned from normal to non-
critical state.

Warning

FQXSPPW0101J

Redundancy Degraded for [RedundancySetElementName] has
asserted.

Warning

FQXSPPW0104J

Non-redundant:Sufficient Resources from Redundancy Degraded or
Fully Redundant for [RedundancySetElementName] has asserted.

Warning

FQXSPSD0002G

Failure Predicted on [StorageVolumeElementName] for array
[ComputerSystemElementName].

Warning

FQXSPSD0003G

Failure Predicted on drive [arg1] in the enclosure/chassis (MTM-SN:
[arg2]).

Warning

FQXSPSE0000F

The Chassis [PhysicalPackageElementName] was opened.

Warning

FQXSPSE4006I

XCC detected an invalid SSL certificate in the Management Controller
[arg1] .

Warning

FQXSPUN0009G

Sensor [SensorElementName] has asserted.

Warning

FQXSPUN0018J

Sensor [SensorElementName] has transitioned from normal to non-
critical state.

Warning

FQXSPBR4003I

Platform Watchdog Timer expired for [arg1].

Error

FQXSPBR4007I

Management Controller [arg1]: Configuration restoration from a file by
user [arg2] failed to complete.

Error

FQXSPBR4008I

Management Controller [arg1]: Configuration restoration from a file by
user [arg2] failed to start.

Error

FQXSPCA0002M

Numeric sensor [NumericSensorElementName] going low (lower
critical) has asserted.

Error

FQXSPCA0009M

Numeric sensor [NumericSensorElementName] going high (upper
critical) has asserted.

Error

FQXSPCA0011N

Numeric sensor [NumericSensorElementName] going high (upper
non-recoverable) has asserted.

Error

FQXSPCA0016M

Sensor [SensorElementName] has transitioned to critical from a less
severe state.

Error

FQXSPCA0017M

Sensor [SensorElementName] has transitioned to critical from a less
severe state.

Error

FQXSPCA0019N

Sensor [SensorElementName] has transitioned to non-recoverable
from a less severe state.

Error

FQXSPEA0002M

Sensor [SensorElementName] has transitioned to critical from a less
severe state.

Error

FQXSPFW0000N

The System [ComputerSystemElementName] encountered a POST
Error.

Error

FQXSPIO0003N

A diagnostic interrupt has occurred on system
[ComputerSystemElementName].

Error

ThinkSystem SR630 V2 Messages and Codes Reference

Содержание 7Z70





















































































































































































































Результаты поиска

Содержание 7Z70

Отзывы:

Похожие инструкции для 7Z70

Бренды по названию

Популярные бренды

Lenovo 7Z70, Справочник

Результаты поиска

Содержание 7Z70

Отзывы:

Похожие инструкции для 7Z70

Бренды по названию

Популярные бренды