Lenovo 7Z70 Скачать руководство пользователя страница 193

Страница: 193 / 212

User Action:

1. Ensure proper operation of the virtual USB connection.

2. Restart BMC via supported method and reboot the system.

3. Reflash BMC firmware.

4. Retry OS deployment.

5. Perform AC reset or virtual reseat.

Note:

When performing AC reset, after powering off AC, wait several seconds before powering on

AC. After AC power is restored, power on the host system.

6. If the problem persists, please contact technical support.

•

FQXPMOS0006K: BMC communication succeeded. Volume Name MISMATCHED.

Severity: Warning

User Action:

1. Restart BMC via supported method and reboot the system.

2. If the problem persists, reflash BMC firmware.

3. Retry OS deployment.

4. Perform AC reset or virtual reseat.

Note:

When performing AC reset, after powering off AC, wait several seconds before powering on

AC. After AC power is restored, power on the host system.

5. If the problem persists, please contact technical support.

•

FQXPMOS0007K: Failed to read License RTF file.

Severity: Warning

User Action:

1. Restart BMC via supported method and reboot the system.

2. If the problem persists, reflash BMC firmware.

3. Use another OS media (USB DVD or USB key).

4. Retry OS deployment.

5. Perform AC reset or virtual reseat.

Note:

When performing AC reset, after powering off AC, wait several seconds before powering on

AC. After AC power is restored, power on the host system.

6. If the problem persists, please contact technical support.

•

FQXPMOS0008K: Please make sure the Ethernet cable has been plugged into your computer and

your network settings are correct.

Severity: Warning

User Action:

1. Ensure proper operation of SMB/CIFS and NFS communications (make sure the Ethernet cable has

been plugged and network settings are correct.).

2. Make sure the OS version and folder path are correct.

3. Retry CIFS and NFS installation.

4. If the problem persists, please contact technical support.

Chapter 4

XClarity Provisioning Manager events

189

Содержание 7Z70





















































































































































































































Результаты поиска

Содержание 7Z70

Отзывы:

Lenovo 7Z70, Справочник, Страница: 193 / 212

Результаты поиска

Содержание 7Z70

Отзывы: