Lenovo 7Z70 Скачать руководство пользователя страница 136

Страница: 136 / 212

Note:

Some cluster solutions require specific code levels or coordinated code updates. If the device

is part of a cluster solution, verify that the latest level of code is supported for the cluster solution
before you update the code.

3. If problem persists, collect Service Data log.

4. Contact Lenovo Support.

•

FQXSPUP4004I: XCC firmware mismatch between nodes/servers [arg1] and [arg2]. Please attempt

to flash the XCC firmware to the same level on all nodes/servers.

A mismatch of XCC firmware has been detected between nodes/servers

Severity: Error
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0132

User Action:

Complete the following steps until the problem is solved:

1. Reflash XCC/BMC firmware to the latest version on all servers.

Note:

Some cluster solutions require specific code levels or coordinated code updates. If the device

is part of a cluster solution, verify that the latest level of code is supported for the cluster solution
before you update the code.

2. If problem persists, collect Service Data log.

3. Contact Lenovo Support.

•

FQXSPUP4005I: FPGA firmware mismatch between nodes/servers [arg1] and [arg2]. Please

attempt to flash the FPGA firmware to the same level on all nodes/servers.

A mismatch of FPGA firmware has been detected between nodes/servers

Severity: Error
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0133

User Action:

Complete the following steps until the problem is solved:

1. Reflash XCC/BMC firmware to the latest version on all servers.

Note:

Some cluster solutions require specific code levels or coordinated code updates. If the device

is part of a cluster solution, verify that the latest level of code is supported for the cluster solution
before you update the code.

2. If problem persists, collect Service Data log.

3. Contact Lenovo Support.

•

FQXSPUP4006I: Auto promote primary XCC to backup is [arg1] by user [arg2] from [arg3] at IP

address [arg4].

Auto promote primary XCC to backup is enabled or disabled.

Severity: Info

132

ThinkSystem SR630 V2 Messages and Codes Reference

Содержание 7Z70





















































































































































































































Результаты поиска

Содержание 7Z70

Отзывы:

Lenovo 7Z70, Справочник, Страница: 136 / 212

Результаты поиска

Содержание 7Z70

Отзывы: