Lenovo 7Z70 Скачать руководство пользователя страница 194

Страница: 194 / 212

•

FQXPMOS0009K: Current System Boot Mode is Legacy. LXPM OS installation only support UEFI

Mode.

Severity: Warning

User Action:

1. Change boot mode to UEFI mode

2. Retry OS deployment.

•

FQXPMOS0028I: [arg1] OS installed

Severity: Info

User Action:

Information only; no action is required.

•

FQXPMSD0001M: HDD Test was interrupted by the host with a hardware or software reset

Severity: Error

User Action:

1. Remove A/C from the server and reseat all drives, backplanes, RAID adapters, expanders (if any), and

cables.

2. Ensure device firmware is at the latest level.

3. Retry the test.

4. If the problem persists, please contact technical support.

•

FQXPMSD0002M: A fatal error or unknown test error occurred while the device was executing its

self-test

Severity: Error

User Action:

1. Remove A/C from the server and reseat all drives, backplanes, RAID adapters, expanders (if any), and

cables.

2. Ensure device firmware is at the latest level.

3. Retry the test.

4. If the problem persists, please contact technical support.

•

FQXPMSD0003M: self-test completed having a test element that failed and the test element that

failed is not known.

Severity: Error

User Action:

1. Remove A/C from the server and reseat all drives, backplanes, RAID adapters, expanders (if any), and

cables.

2. Ensure device firmware is at the latest level.

3. Retry the test.

4. If the problem persists, please contact technical support.

•

FQXPMSD0004M: self-test completed having the electrical element of the test failed.

Severity: Error

190

ThinkSystem SR630 V2 Messages and Codes Reference

Содержание 7Z70





















































































































































































































Результаты поиска

Содержание 7Z70

Отзывы:

Lenovo 7Z70, Справочник, Страница: 194 / 212

Результаты поиска

Содержание 7Z70

Отзывы: