Lenovo 7Z70 Скачать руководство пользователя страница 132

Страница: 132 / 212

Alert Category: System - Other
SNMP Trap ID:
CIM Prefix: PLAT CIM ID: 0532

User Action:

Information only; no action is required.

•

FQXSPUN2009I: Sensor [SensorElementName] has deasserted.

This message is for the use case when an implementation has detected a Sensor has deasserted.

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID:
CIM Prefix: PLAT CIM ID: 0509

User Action:

Information only; no action is required.

•

FQXSPUN2012I: Sensor [SensorElementName] has deasserted.

This message is for the use case when an implementation has detected a Sensor has deasserted.

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID:
CIM Prefix: PLAT CIM ID: 0509

User Action:

Information only; no action is required.

•

FQXSPUN2018I: Sensor [SensorElementName] has deasserted the transition from normal to non-

critical state.

This message is for the use case when an implementation has detected that a Sensor has deasserted a
transition to non-critical from normal.

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: Warning - Other
SNMP Trap ID: 60
CIM Prefix: PLAT CIM ID: 0521

User Action:

Information only; no action is required.

•

FQXSPUN2019I: Sensor [SensorElementName] has transitioned to a less severe state from critical.

This message is for the use case when an implementation has detected a Sensor transition to less severe
from critical.

Severity: Info
Serviceable: No
Automatically notify Support: No

128

ThinkSystem SR630 V2 Messages and Codes Reference

Содержание 7Z70





















































































































































































































Результаты поиска

Содержание 7Z70

Отзывы:

Lenovo 7Z70, Справочник, Страница: 132 / 212

Результаты поиска

Содержание 7Z70

Отзывы: