Lenovo 7Z70 Скачать руководство пользователя страница 185

Страница: 185 / 212

3. Reboot system and retry OS booting.

4. Perform AC reset or virtual reseat.

Note:

When performing AC reset, after powering off AC, wait several seconds before powering on

AC. After AC power is restored, power on the host system.

5. If the problem persists, please contact technical support.

•

FQXPMCL0002K: Failed to read Deployment Manager Signature from USB.

Severity: Warning

User Action:

1. Ensure proper operation of the virtual USB connection.

2. Restart BMC via BMC setting under uEFI setup on LXPM left panel. Restart BMC via supported

method and reboot the system.

3. Reflash BMC firmware.

4. Clone the image over and retry the operation.

5. Perform AC reset or virtual reseat.

Note:

When performing AC reset, after powering off AC, wait several seconds before powering on

AC. After AC power is restored, power on the host system.

6. If the problem persists, please contact technical support.

•

FQXPMCL0003K: BMC communication failed: DRIVER Mount Failure.

Severity: Warning

User Action:

1. Ensure proper operation of the virtual USB connection.

2. Restart BMC via supported method and reboot the system.

3. Reflash BMC firmware.

4. Clone the image over and retry the operation.

5. Perform AC reset or virtual reseat.

Note:

When performing AC reset, after powering off AC, wait several seconds before powering on

AC. After AC power is restored, power on the host system.

6. If the problem persists, please contact technical support.

•

FQXPMCL0004K: BMC communication succeeded. Volume Name MISMATCHED.

Severity: Warning

User Action:

1. Restart BMC via supported method and reboot the system.

2. Reflash BMC firmware.

3. Clone the image over and retry the operation.

4. Perform AC reset or virtual reseat.

Note:

When performing AC reset, after powering off AC, wait several seconds before powering on

AC. After AC power is restored, power on the host system.

5. If the problem persists, please contact technical support.

Chapter 4

XClarity Provisioning Manager events

181

Содержание 7Z70





















































































































































































































Результаты поиска

Содержание 7Z70

Отзывы:

Lenovo 7Z70, Справочник, Страница: 185 / 212

Результаты поиска

Содержание 7Z70

Отзывы: