If no coordinate components were excluded, the correspondences between the measured
points and the nominal points are determined automatically.
If coordinate components were excluded, you need to define the correspondences manually
through the ID, i.e. by measuring the points in the correct order.
The following functions are available:
Column: ID
If coordinate components were excluded, the IDs of previously measured points are displayed.
When measuring points, please make sure the correct ID is selected.
If no coordinate components were excluded, the ID column is initially empty. The IDs will be
computed automatically in the next step when the transformation is calculated.
Columns: X | Y | Z
Displays the coordinates of measured points. If coordinate components were excluded, points
that have not yet been measured are marked with a “---” symbol.
From Scene
If no coordinate components were excluded, all points from the data explorer are entered in
the table. If coordinate components were excluded, only those points are entered that match
the name of a loaded point.
