23
Drive
When transferring the platform, pay attention to the following factors:
1.
Do not exceed maximum inclination for the drive. Make sure the driving surface is solid.
2.
Secure tools and other materials to prevent them from falling or shifting.
3.
Operator should wear safety harnesses and keep them fastened whenever operating the
machine. Follow your local rules and regulations regarding safety harnesses in access
platforms!
4.
Manoeuvre the joystick in a controlled manner: Avoid sudden movements.
To drive the machine:
1.
Switch on the machine and select platform controls
2.
Start the combustion engine or electric motor.
3.
Ensure that the booms are in transport position and the outriggers are off the ground.
Otherwise driving the access platform is prevented.
4.
Ensure that the drive speed selection is in the correct position. Changing the drive speed while
the access platform is moving is prohibited!
5.
To drive the machine: grab and squeeze the joystick to hold down the joystick enabling button
on the frontside of the lever. To move forward, push the joystick forward and backward to
reverse. To turn the machine left or right, simply turn the joystick to the desired direction.
NOTE: The machine is controlled with skid steer method and the control
properties vary depending on terrain, so great care must be taken when
starting to drive.
NOTE: The access platform can only be driven when all booms are in
transport position!
The
machine’s transmission system is hydrostatic. The model with wheels is 4
-wheel drive. Both
models (4-wheel-drive or rubber tracks) are moved by four hydraulic motors.
On low speed the access platform can be turned on the spot if necessary, by pushing the
joystick in approximately 40-degree angle towards left or right, either forwards or backwards,
depending on desired turning direction.
On high drive speed only, gentle curves are possible to leave as minimal mark on the ground as
possible. Hydraulic power is limited on high speed to prevent sudden movements. Use lower
drive speed on difficult terrain.
NOTE: Learn how to drive with the machine at a low speed. Operate the
joystick smoothly to avoid abrupt and jerky movements. When driving, pay
special attention to stability and the dimensions, especially the length, of
the machine.
Содержание 135 NEO
