Leguan 135 NEO, Руководство оператора и по обслуживанию

Страница: 14 / 66

14
-
Make sure that there are no overhead obstacles on the work site that could prohibit lifting of
the platform, or objects that might cause a collision
-
Do not operate this access platform in the working area of another overhead lifting device or
similar equipment that is moving, unless this lifting device is secured so that there is no risk of
collision
-
Beware of crushing hazard when holding the handrail of the platform in a potential collision
situation
-
When operating the lift, beware of limited visibility and trapping hazard.
Risk of electric shock
-
This machine is not insulated from voltage or protected against contact with live parts
-
Do not touch the machine if it comes in contact with a live electric line
-
Persons on the platform or at ground level must not touch or operate the machine before
power has been cut off from the electric line
-
During welding repairs, using any part of this access platform as an earth conductor is
prohibited
-
Do not use this access platform during a thunderstorm or in high winds
-
Leave clearance for electric lines, taking into account movements of the platform, movements
of electric lines, and high winds and gusts.
The minimum safety clearances for overhead cables are shown in the following table. The
clearances for the most commonly used voltages in overhead lines are as follows, use these
safety clearances if national or local regulations are not available:
VOLTAGE MIN. DISTANCE
0 – 1,000 V 2 m
1 – 45 kV 3 m
110 kV 5 m
220 kV 5 m
400 kV 5 m
Risk of fire / explosion
-
The machine must not be started in a place where one can smell LPG, petrol, solvent or other
flammable substance
-
Do not add fuel when the engine is running or hot
-
Charge the battery only in places with sufficient ventilation, where there is no open fire and
no activity which could cause spark emissions (such as welding).