Lauda IN 1030 T, Руководство по эксплуатации

Страница: 102 / 200

1.
In the [Basic setup] menu select the menu item

Language .

A list containing the languages opens.
2. Select your language using the arrow keys.
3. Press the Enter key to confirm your selection.

The new setting is valid with immediate effect.
In the [Temp. unit] menu you can select in which unit the temperature value
is displayed. In general, this setting is valid for all windows in the display.
1.
In the [Basic setup] menu select the menu item

Temp. unit .

A list of the options opens.
2. Select one of the following options:
n
With [°C] all temperatures are displayed in °Celsius .
n
With [°F] all temperatures are displayed in °Fahrenheit .
3. Press the Enter key to confirm your selection.

The new setting is valid with immediate effect.
6.14 Calibrating the temperature probe
A calibrated reference thermometer with the desired level of accu-
racy is necessary. Otherwise you should not change the calibration
of your constant temperature equipment.
If, when checking the temperature in a steady state, you discover a constant
temperature deviation of T
int
or T
ext
from the reference thermometer, this
can be equaled out via the Calibration menu point.
With the menu point Offset (1-point comparison), the characteristic of the
temperature switch is adjusted in parallel by the input value.
With the menu point
2-point calibration (2-point comparison), the charac-
teristic of the temperature switch is adjusted and the slope of the character-
istic is changed.
It is possible to change the temperature values T
int
and T
ext
within a
range of
±
3 K respectively.
Fig. 58: Select language
Select temperature unit
V6 Integral Process Thermostats and High-Temperature Thermostats 102 / 198