background image

Manufacturer reserves the right to discontinue, or change at any time, specifications or designs without notice and without incurring obligations.

Catalog No. 04-53330022-01

          Printed in U.S.A.

                     Form 33CS-22SO

Pg 1

8-11

Replaces: New

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  

Owner’s Manual

Part Number 33CSCPACHP-01

SAFETY CONSIDERATIONS

Read and follow manufacturer instructions carefully. Fol-

low all local electrical codes during installation. All wiring

must conform to local and national electrical codes. Improper

wiring or installation may damage thermostat.

Recognize safety information. This is the safety alert sym-

bol 

 . When the safety alert symbol is present on equipment

or in the instruction manual, be alert to the potential for person-

al injury.

Understand the signal words DANGER, WARNING, and

CAUTION. These words are used with the safety alert symbol.

DANGER identifies the most serious hazards which will result

in severe personal injury or death. WARNING signifies a haz-

ard which could result in personal injury or death. CAUTION

is used to identify unsafe practices which would result in minor

personal injury or property damage.

GENERAL

Carrier’s Comfort Pro programmable thermostats are wall-

mounted, low-voltage thermostats which maintain room tem-

perature by controlling the operation of a heating and/or air

conditioning system. This thermostat can be used with a heat

pump, air conditioner or water source heat pump operation. A

variety of features are provided including battery operation,

separate heating and cooling set points, auto changeover, key-

pad lockout, and backlighting. Programming is available for ei-

ther 2 or 4 periods per day. The programming interface is a one

touch interface, with the Comfort selections Occupied, Unoc-

cupied, and Limit (Energy Savings Mode). The user can adjust

the heating and/or cooling set points for each of the three com-

fort selections.

OPERATION

Thermostat Button Identification — 

 

The follow-

ing buttons are located on the thermostat display. See Fig. 1 for

button locations. 

• FAN (1) — Selects whether the fan operates continu-

ously (on) or only when needed for heating or cooling

(auto)

• HOLD/RUN (2) — Holds the currently selected temper-

ature or runs the scheduled program

• MODE (3) — Selects whether thermostat is set for heat-

ing, cooling, emergency heat, auto (heat and cool as

needed), or off

• UP (4) — Increases the temperature or adjusts the screen

selection up when setting advanced programming

features

• DOWN (5) — Decreases the temperature or adjusts the

screen selection down when setting advanced program-

ming features

• DONE (6) — Saves settings when completing a set-up

or programming step

• LIMIT (7) — Indicates occupied heating and cooling

settings for the program period which are predefined and

more energy efficient

• UNOCC (8) — Activates heating and cooling settings

for the unoccupied program period

• OCC (9) — Activates heating and cooling settings for

the occupied program period

• D/H/M SET CLOCK (10) — Activates clock set mode

day/hour/minutes settings

• START TIME (11) — Activates the programming menu,

displaying the programmed start times

• PERIOD (12) — Activates the programming menu, dis-

playing the programmed time periods

• DAYS (13) — Activates programming menu, displaying

three options - all days, weekdays and weekends

Thermostat On-Screen Indicators — 

The follow-

ing on-screen indicators can be displayed on the thermostat dis-

play. See Fig. 2 for location of indicators.
• Clock  (1)

• Fan mode - on or auto (2)

• Selected heating set point; "on" indicates system is in

heating mode (3) 

• System is in auxiliary (supplemental) mode (4)

• Current temperature (5)

• Thermostat mode is either off or using emergency heat

(Em Heat) (6) 

• Fahrenheit units (7)

• Keypad is locked (no padlock means unlocked) (8)

OCC

LIMIT

UNOCC

push and hold to set

set

schedule

days

period start time

set

clock

d/h/m

mode

fan

done

off

Em

heat

fan

auto

fan

on

aux

heat

on

cool

on:

°

F

°

C

temporary

hold

all days

weekdays

weekend

actual temp

start

at

6

5

4

3

2

1

7

8

9

10

11

12

1

3

hold

run

Fig. 1 — Thermostat Button Identification

 (Door Open)

a33-9220

Comfort™ Pro

Programmable

Commercial Thermostat

Содержание 33CSCPACHP-01









Отзывы: