Larson Davis HVM100, Руководство пользователя

Страница: 87 / 174

4/11/03 Taking Measurements/ Viewing Data on the HVM100 7-7
Data Key
NOTE: To view each selection, first press
the
c
key, and then press the
r
lu
or
d
arrow key to scroll
through each selection.
The
DATA
key is used to view the overall data being gath-
ered by the instrument. There are 8 screens available in the
data menu. To scroll through the menu, use the
u
and
d
arrow keys. To view other channels use the
r
and
l
arrow keys. The screens are formatted as follows.
Data Presented Screen appearing on the HVM100
Top screen reports Time and Date. It will also report the
last recalled setup, or data file name, which ever was
more recent.
P r o c e s s B a t c h 0 3
1 9 : 3 4 0 3 O c t 9 9
2nd screen reports detector and averaging time on first
line. RMS level, units, frequency weighting and channel
on second line. (A=acceleration.)
A r m s 1 0 s e c
3 . 5 7 0 0 m / s
2
F a Z
3rd screen reports minimum level on first line, and max-
imum level on second line. Frequency weighting and
channel are also reported.
A m i n . 0 0 0 0 0
A m a x . 0 1 4 3 0 F a Z
4th screen reports Peak level on first line and the long
term maximum peak level on the second line. Frequency
weighting and channel are also reported.
P e a k . 0 4 7 8 0
A m p . 0 9 5 5 0 F a Z
5th screen reports the long term average that runs from
run to reset and averaging time on first line. Value, units,
frequency weighting and channel on the second line.
A e q 0 : 0 0 : 0 1 0 3
1 . 5 0 0 0 m / s
2
F a Z
Additional Data view screens for Hand Arm Mode
The 6th and 7th screens report the Energy Equivalent
levels averaged over the run time. 1, 2, 4, and 8 refer to
the run time in Hours. (A (8) is the Energy Equivalent
level projected over 8 hours)
A ( 1 ) . 0 0 1 0 4
A ( 2 ) . 0 0 0 7 3 F a Z