manualshive.com logo in svg

Larson Davis HVM100, Руководство пользователя

Поделиться
Скачать
Larson Davis HVM100 Скачать руководство пользователя страница 168

F-2

Warranty/Customer Satisfaction

April 11, 2003

E. NO SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES.  LD'S SOLE

OBLIGATIONS UNDER THIS LIMITED WARRANTY ARE SET FORTH ABOVE IN
PARAGRAPHS A, B, C AND D.  IN NO EVENT SHALL LD (ITS CONTRACTORS OR
SUPPLIERS) BE LIABLE TO THE BUYER FOR ANY LOST PROFITS, DIRECT,
INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES, WHETHER
BASED ON CONTRACT, IN TORT OR ANY OTHER LEGAL THEORY.  SUCH DAMAGES
FOR WHICH LD SHALL NOT BE RESPONSIBLE INCLUDE, BUT ARE NOT LIMITED
TO, LOST TIME AND CONVENIENCE, LOSS OF USE OF THE PRODUCT, THE COST OF
A PRODUCT RENTAL, COSTS OF GASOLINE, TELEPHONE, TRAVEL OR LODGING,
THE LOSS OF PERSONAL OR COMMERCIAL PROPERTY, AND THE LOSS OF
REVENUE.

Some states do not permit the limitation or disclaimer of incidental or consequential damages.

Therefore, the above disclaimer of incidental or consequential damages may not apply to certain
purchasers.

F.

NO LIABILITY IN EXCESS OF PURCHASE PRICE.  IN NO EVENT SHALL LD'S

OBLIGATIONS UNDER THIS LIMITED WARRANTY EXCEED THE PURCHASE PRICE
OF THE PRODUCT PLUS ANY SHIPPING CHARGES THAT LD MAY BE OBLIGATED
TO PAY PURSUANT TO PARAGRAPH C ABOVE.

G. NO EXTENSION OF STATUTE OF LIMITATIONS.  ANY REPAIRS PERFORMED

UNDER THIS LIMITED WARRANTY SHALL NOT IN ANY WAY EXTEND THE
STATUTES OF LIMITATIONS FOR CLAIMS UNDER THIS LIMITED WARRANTY.

H. WAIVER OF OTHER WARRANTIES.  THE EXPRESS WARRANTIES SET FORTH IN

THIS LIMITED WARRANTY ARE IN LIEU OF AND EXCLUDE ANY AND ALL OTHER
WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE.

Some states do not permit the disclaimer of implied warranties.  Therefore, the above disclaimer of

implied warranties may not apply to certain purchasers.

I.

Procedure for Warranty Performance.  If the product fails to perform to LD's specifications,

the Buyer must provide LD with the applicable model and serial numbers, the date of purchase, and
the nature of the problem.

J.

ADDITIONAL EXCLUSIONS FROM THIS LIMITED WARRANTY.

NOTWITHSTANDING ANYTHING TO THE CONTRARY CONTAINED IN THIS
LIMITED WARRANTY, THIS LIMITED WARRANTY DOES NOT COVER ANY OF THE
FOLLOWING:

1.EQUIPMENT THAT HAS BEEN ABUSED, DAMAGED, USED BEYOND RATED
CAPACITY, OR REPAIRED BY PERSONS OTHER THAN AUTHORIZED SERVICE
PERSONNEL.

Содержание HVM100















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды