9: Line, Tunnel, Terminal, and Host Settings
EDS User Guide
68
2. Enter or modify the following settings:
Tunnel- Modem
Emulation Page
Settings
Description
Echo Pluses
Select Enabled to echo +++ when entering modem
Command Mode.
Echo Commands
Select Enabled (same as modem command ATE1)to
echo the modem commands to the console.
Verbose Response
Select Enabled (same as modem command ATQ0)to
send modem response codes out on the serial line.
Response Type
Select the type of response code: Text (same as
modem command ATV1) or Numeric (same as modem
command ATV0).
Error Unknown
Commands
Select whether an ERROR or OK response is sent in
reply to unrecognized AT commands. With
Enabled selected (same as modem command ATU0),
ERROR is returned for unrecognized AT commands.
With Disabled selected (same as modem command
ATU1), OK is returned for unrecognized AT commands.
(default)
Incoming Connection:
Select either Disabled (same as modem command
ATS0=0), Automatic(same as modem command
ATS0=1), or Manual (same as modem command
ATS0=2).
Connect String
Enter the connect string. This modem initialization string
prepares the modem for communications. It is a
customized string sent with the “CONNECT” modem
response code.
Display Remote IP:
With Display Remote IP Enabled, the incoming RING is
followed by the IP address of the caller.
3. Click Submit.
Содержание EDS32PR
Страница 37: ...5 Installation of EDS8PR EDS16PR or EDS32PR EDS User Guide 37 Figure 5 4 Example of EDS16PR Connections...
Страница 42: ...7 Configuration Using Web Manager EDS User Guide 42 Figure 7 1 The EDS Web Manager Status Home Page...
Страница 116: ...12 Maintenance and Diagnostics Settings EDS User Guide 116 Figure 12 16 Diagnostics Buffer Pools...
