Lantronix EDS32PR, Руководство пользователя

Страница: 24 / 163

3: Installation of EDS8PS and EDS16PS
EDS User Guide
24
Serial Ports
The EDS8PS has 8 serial ports and the EDS16PS has 16 serial ports on the back
panel. All are configured as DTE and support up to 230,400 baud.
Console Port
The front panel of the EDS8/16/32PR provides an RJ45 Console port. It is an extra
serial port configured as DTE and supports baud rates up to 230,400 baud.
Figure 3-3. RJ45 Serial Port
Ethernet Port
The back panel of the EDS8/16PS provides a network interface via the rightmost
RJ45 port. This port can connect to an Ethernet (10 Mbps) or Fast Ethernet (100
Mbps) network. The Speed LED on the back of the EDS8/16PS shows the
connection of the attached Ethernet network. The EDS8/16PS can be configured to
operate at a fixed Ethernet speed and duplex mode (half- or full-duplex) or to auto-
negotiate the connection to the Ethernet network.
LEDs
Light-emitting diodes (LEDs) on the front panel show status information.
Each serial port plus the console port have a Transmit and a Receive LED.
The Ethernet port has Speed, Activity, Power, and Status LEDs.
The table below describes the LEDs on the front of the EDSPS.
Front Panel LEDs
LED Description
Transmit
(green) Blinking = EDS is transmitting data on the serial port.
Receive (yellow) Blinking = EDS is receiving data on the serial port.
Power (blue) On = EDS is receiving power.
Diag (green) Fast blink = initial startup (loading OS).
Slow blink (once per second) = operating system startup.
On = unit has finished booting.