9: Line, Tunnel, Terminal, and Host Settings
EDS User Guide
56
Line -
Command Mode
Page Settings
Description
required delay.
Binary = string of characters representing byte values where
each hexadecimal byte value starts with \0x and each
decimal byte value starts with \.
Echo Serial
String
Select Yes to enable echoing of the serial string at boot-up.
Sign-on
Message
Enter the boot-up sign-on message. Select a string type.
Text = string of bytes sent on the serial line during boot time.
Binary = one or more byte values separated by commas.
Each byte value may be decimal or hexadecimal. Start
hexadecimal values with 0x.
Note:
This string will be output on the serial port at boot,
regardless of whether command mode is enabled or
not.
3. In Current Configuration, clear currently stored settings as necessary.
4. Click Submit.
Содержание EDS32PR
Страница 37: ...5 Installation of EDS8PR EDS16PR or EDS32PR EDS User Guide 37 Figure 5 4 Example of EDS16PR Connections...
Страница 42: ...7 Configuration Using Web Manager EDS User Guide 42 Figure 7 1 The EDS Web Manager Status Home Page...
Страница 116: ...12 Maintenance and Diagnostics Settings EDS User Guide 116 Figure 12 16 Diagnostics Buffer Pools...
