16
Sold-Out Feature
Ready - signifies there is available product and the
valve will dispense when activated
Out - signifies there is no available product or there is
a problem with the specified brand and will dispense
when activated.
Auto - signifies that the configured Sold Out Sensor
controls whether the brand can be dispensed. This
feature requires an optional sold out sensor kit, does
not come standard, and is available for up to ten
(10) brands at one time. The following is a set of
instructions on how to set up this feature. If no sold out
sensor is assigned then the Auto feature acts the same
as the Ready feature.
NOTE
1. From the Service Menu, press the
Sold Out
button.
2. Press the
Override
tab on the far left side of the screen.
3. From here, manually adjust specific brands to read
Ready,
Out,
or
Auto
This feature will automatically shut-off the pump for
that specific brand when there is no product to be
dispensed. This feature only comes into effect when
the corresponding brand is changed to “Auto” in the
Sold-Out menu.
NOTE
A. Sold Out Sensors Tab
B. Sold Out Sensors 1-10
C. SO3 Enabled for Brand S9.
D. CO
2
Low Pressure Indicator
A
B
C
D
4. Press the
Sold Out Sensors
tab on the left side of the
screen.
5. To add the Auto Sold Out feature to a specific brand, simply
tap the corresponding intersection to activate a sold out sen-
sor for that brand.
6. Press the
Menu
button to return to the Service Menu.
If a Sold Out Sensor is utilized for the CO
2
low section,
as shown in the image above, then the CO
2
Low
Pressure Indicator will appear whenever the unit or a
valve is not receiving enough CO
2
.
NOTE