10
Adding New Brand/Flavor Module
1. In order to add a new brand or flavor module, the module
must first be activated.
2. From the Service menu, press the
Valve Configuration
button.
3. Press the
Valve Type
tab on the far left side of the screen,
then select any of the inactive modules.
A. Valve Type Tab
B. Valve Type Button
A
B
A. Valve Function
B. Valve Type
A
B
4. From here, choose the desired function and valve type for
the incorporated valve module.
5. Press the
Valve Configuration
button to return to the Valve
Configuration menu.
6. Repeat steps 3 - 5 for any other desired brand or flavor
modules.
7. From the Valve Configuration menu, press the
Configure
tab
on the far left side of the screen.
A. Configure Tab
D. Brand Water Type
B. Configure Button
E. Brand Ratio
C. Activated Module
A
B
C
D
E
9. Select a new brand from the available Brands Library tabs
on the left side of the screen.
8. Press the
Configure
button under any of the activated brand
or flavor modules to open its Configuration Page.
Each brand has a default water type and ratio already
set when they are selected. The water type and ratio
can be adjusted if necessary, however, adjusting the
ratio here is purely representational and does not
set the ratio for the finished drink. Adjust the ratio by
selecting the Ice or No Ice ratio using the buttons in the
upper right corner of the screen, or by manually
adjusting the ratio by tapping the number and entering
the new value on the keypad.
NOTE
A
B
D
C
A. Brand Library Tab
C. Brand Ratio
B. Replacement Brand
D. Water Type
