Lancellotti MAESTRO, Инструкции для пользователя

Страница: 394 / 408

Instructions for the user
394
14. Cleaning and maintenance
Before cleaning or carrying out maintenance, switch off the power supply to the appliance
and close the gas tap.
Warning: Servicing should be carried out only by authorised personnel.
Do not clean the surfaces of the appliance when they are still hot.
Use only suitable detergents to clean the surfaces of the appliance. The manufacturer
declines all responsibility and is not liable for damage arising from the use of unsuitable
and/or other detergents than those indicated.
Do not use pressure or steam spray guns to clean the appliance.
14.1 Cleaning the stainless steel surfaces
To clean and preserve the stainless steel surfaces, use a
solution of warm water and vinegar or
neutral soap
. Pour the solution onto a damp cloth and wipe the steel surface, in the direction of
the satin finish, rinse thoroughly and dry with a soft cloth or chamois leather.
Do not under any circumstances use metallic sponges or sharp scrapers that may damage
the surfaces.
Only use non-scratch, non-abrasive sponges and, if necessary, wooden or plastic
utensils.
14.2 Cleaning the enamelled surfaces
Clean with a non-scratch,
non-abrasive
sponge dampened with
neutral soap and water
. Grease
stains can easily be eliminated with
hot water
or a product specifically made for cleaning enamel.
Rinse carefully and dry with a soft cloth or a piece of deerskin.
Do not use products containing abrasives, scouring pads, steel wool or acid, which may
spoil the surfaces.
Do not leave acid or alkaline substances on the enamel (lemon juice, vinegar,
salt, etc.).
14.3 Cleaning the polished surfaces
Clean with a
non-abrasive
, scratchproof sponge dampened with
warm water and neutral soap
or
with a standard detergent for polished surfaces. Rinse and dry carefully with a soft cloth.
Abrasive pastes, coarse wire pads, steel wool or acid will damage the surfaces. Do not use
alcohol.
14.4 Cleaning the wooden surfaces, accessories and parts
We recommend using cleaning products normally available on the market. These products ensure
the wood is preserved over time. If these products are not available, we recommend removing the
dirt as soon as possible using a cloth dampened with
water and neutral soap
. Rinse thoroughly
and dry with a soft cloth. Remove the larger incrustations and more stubborn residues using a
scratch-resistant scraper for wood
or a special sponge designed for delicate surfaces.
Do not under any circumstances use metallic sponges or sharp scrapers that may damage
the surfaces.
Do not wash wooden accessories and parts in the dishwasher. Keep dry and avoid extreme
temperature changes. Excessive humidity and extreme temperature changes may
irrevocably deform the wooden accessories and parts.
14.5 Cleaning the knobs and the control panel
Clean the knobs and the control panel with a damp cloth.