17
OPERATIONS
7
•
SELECTING AND STARTING A SAVED PROGRAM
7.1
•
SWITCH ON
Press button 15 for 3 seconds.
Whenever
a symbol appears in the anomalies display
(display
7-9
) see the
“Selfdiagnosis and
anomalies key”
chapter.
7.2
•
RETRIEVE
Press the Recipes button
6
, the display will
show
[ACC]
, turn the knob
8
until
[Pro]
is displayed and confirm by pressing the
knob
8
.
Turn the knob
8
to select the program
number to be recalled (see following list of
recipes), shown on the display
7
.
CAUTION:
If the program requires using the
core probe, connect the probe to the front
panel or the display will show
“Err SP”
(probe error). See
“self-diagnosis and fault
identification”
.
7.3
•
START
Viewing the settings
Whenever it should become necessary
during cooking to control the values set
for the current phase, press button
1
. If
the settings of the next phases are to be
displayed, press button
1
and turn the
knob until the display shows the phase of
interest.
7.3a
•
STARTING A PROGRAM WITH
PREHEAT
If the retrieved program has
preheating, display
9
will show
[
InF
].
Press key
15
to start preheating.
A beep and the inscription
[ LoA ]
on the display will signal
when the oven has reached the
temperature.
Place the food in the oven (if
the program includes cooking
phases with the core probe,
insert the probe in the food).
Close the door.
The Cycles
1
button shows the
second LED (2) flashing, which
indicates the activation of the
cooking cycle 2.
7.3b
•
STARTING A PROGRAM WITH
PREHEAT EXCLUDED
Introduce the food (if the
program envisions phases with
core probe, insert the needle into
the product).
Start cooking by pressing button
15
(LED on with fixed light).
Press button
1
for 3 seconds
or turn knob
10
until the time is
taken to zero.
An acoustic signal and LED 2
flashing on button
1
indicate that
the pre-heating phase has been
excluded.
Warning:
pre-heating is not
o n l y n e c e s s a r y w h e n t h e
cooking chamber is already in
temperature.
7.3c
•
S T A R T I N G A P R O G R A M
WITHOUT SAVED PREHEATING
Place the food in the oven (if
the program includes cooking
phases with the core probe,
insert the probe in the food).
Start the first cooking cycle by
pressing key
15
(LED on steady).
90028111rev03
