16
6.1
•
SWITCH ON THE OVEN
Press button 15 for 3 seconds.
Whenever
a symbol appears in the anomalies display
(display
7-9
) see the
“Selfdiagnosis and
anomalies key”
chapter.
6.2
•
SELECT THE PROGRAM
Press the Recipes button
6
, the display will
show
[ACC]
, turn the knob
8
until
[Pro]
is displayed and confirm by pressing the
knob
8
.
Turn the knob until the first free program
is displayed (cooking mode LED flashing
and also program number on the display
7
flashing) and confirm by pressing knob
8
.
Caution
The program is “new” when the LEDs of the
cooking mode buttons and the program
number flash on the display
7
.
The program is “busy” when one LED of the
cooking mode buttons and the program
number on the display
7
have a fixed light.
6.3
•
SELECT
The cooking mode buttons LEDs flash:
press the button of the desired cooking
mode (2 - 3 - 4).
The selected cooking
mode LED will remain on with a fixed light.
6.4
•
SET THE TEMPERATURE OF
CYCLE 1
Tur ning knob 8 sets the cooking
temperature
, which is shown on the
relevant display.
6.5A
•
SET THE TIME OF CYCLE 1
The time display shows
[InF]
.
Turn knob 10
:
to the right to set the cooking time;
to the left to set infinite time,
[InF]
thus
utilizing the
first cycle as preheating.
Or
6.5B
•
SET THE CORE PROBE
FOR CYCLE 1
Refer to
“Setting the core probe”
.
6.6
•
SELECT CYCLE 2
AND THE FOLLOWING ONES
(UP TO 4 CYCLES)
Press the cycles button
1
, the second
flashing LED (2) switches-on on the
cycles button. Proceed with setting as per
paragraph 6.3. If other phases are desired,
follow the same sequence.
6.7
•
SAVING THE PROGRAM
Hold button
1
down for 3 seconds, display
7
shows
[REC]
, confirm memorisation by
pressing knob
8
.
The program number where the cooking
mode has been saved is shown on the
display
7
.
6
•
ENTERING AND SAVING A PROGRAM
OPERATIONS
90028111rev03
