13
STARTING THE COOKING PROGRAM
Place the food in the oven. Refer to the
“Practical Advice”
heading for more
information.
If the core probe is to be used, refer to
“Setting the core probe
”.
4.7
•
START
Press key 15
to start cooking: The
LED associated with the key remains
permanently alight.
At this point ...
the temperature display 7
indicates the
actual oven temperature.
The time display 9
indicates the time
remaining to complete cooking.
4.8
•
END OF COOKING
If infinite time has been selected, stop
cooking manually by pressing key
15
for a
few seconds (LED next to key
15
OFF).
If a cooking time or core probe temperature
has been entered, a beep will be generated
when the time elapses or the set probe
temperature has been reached to indicate
that cooking has terminated (LED next to
key
15
OFF).
To stop the signal just open the door or
press a knob (
8 - 10
). Remove the food
from the oven, following the directions
given under paragraph 2.7 of the
“Points to
remember” heading”
.
Displaying and changing saved values
If, during cooking, it is necessary to check
the settings, press key
1
, the displays will
blink.
If the values displayed have to be modified,
use the relevant knob or keys.
Press the knob to acquire the values
modified or wait for about 10 secs. the new
data is saved automatically, the displays
are fixed on the real values.
Note:
When switching on the appliance
for the first time of the day, the steam
generator drains the water contained,
it tur ns on timed steam generator
washing, then, after filling with water, it
AUTOMATICALLY PREHEATS the steam
generator. When starting a program that
includes steam or combi cooking cycles,
the program is automatically started
as soon as the steam generator has
reached the preheating temperature
so
as to avoid starting the program without
any steam. The intermittent LED of key
15
indicates that the steam generator has not
yet reached the preheating temperature.
4
•
MANUAL SETTINGS FOR ONE-PHASE COOKING
OPERATIONS
90028111rev03