
Page 25 of 60
CHAPTER 3. USE-ADJUSTMENT
3.1 Control Unit
FOR 5-SPEED SPINDLE MOULDE
R
A control panel is provided with your spindle moulder as shown in Fig. 3.1. & Fig. 3.2.
A.
power indicator (CE)
B.
on-off switch
C.
forward/reverse switch
D.
start indicator (CE)
E.
emergency stop
F.
switch for unlock the motor brake(on request)
G.
forward indicator (CE)
Fig. 3-1
H.
speed indicator (CE)
FOR 3-SPEED SPINDLE MOULDER
An on-off switch and a forward/reverse switch are provided with the machine and
should be used as follows to operate your machine.
Fig. 3-2
3.2 Electrical Controls
The control unit should be used as the following to operate your machine:
1. Make certain the spindle lock is disengaged as explained in the section "SPINDLE LOCK" and that the
cabinet door is in the closed position.
2. Rotate the forward/reverse switch (C) Fig.3.1 to either the forward rotation, or reverse rotation.
Rotate the start switch (B) to the right to start the machine. Switch (B) is a magnetic switch and as soon as
the machine is started the switch will return to the center position as shown.
3. To stop the machine, push the mushroom shaped stop button (E), or turn the start/stop switch (B) to the left,
or simply step on brake pedal (B) Fig.3.12, to stop the machine in seconds if this device is available.
3-1
Содержание S45T
