
Page 14 of 60
Fig. 1.1.6
2. Stability
For the machine to be used safety the machine shall be stable and securely fixed to the floor or a stable
structure.
3. Machine setting and adjustment
a) The machine shall be isolated from the power source before any adjustments are made.
b) For clamping and setting of tools refer tool manufacturers recommendations.
c) For safe and efficient cutting the tooling shall be suitable for the material being cut.
The tools shall be sharp and properly set with tools holders carefully balanced.
d) After a set/or adjustment/or repair work or a trouble shooting, please check the safety relevant functions
whether normal or not before a use.
4. Handing of tools
i) Care shall be exercised when handing tools, tool carriers shall be used wherever practicable.
ii) That only tools conforming to EN 847-1:2005 and EN 847-2:2001 and marked MAN shall be used in order
to reduce severity of injuries and kickback speed.
5. Setting the tool in the machine
Use special equipment e.g. gauges for setting the tool when machine is standstill.
Table rings shall be used to close the gap between the table and the spindle to a minimum.
6. Fence adjustments
a) The fence shall always be used for straight work cutting to provide adequate guiding
workpiece.
b) A false fence shall be used wherever possible to minimize the gap between the cutters and the main fence.
1-11
Содержание S45T
