Lafayette Parasol Accu-Rise, Руководство по установке

Страница: 7 / 83

Parasol Installation Instructions BACK
INSTALL THE BRACKETS Cont.
Non-Operable Outside Mount (C.)
- Center the headrail over the window opening at the
desired height and lightly mark each end on a flat
mounting surface.
- Mark 3” from each end of the headrail.
- Center the installation brackets or extension brackets
on your marks and mount flush against the mounting
surface using the screws provided. Use drywall anchors
if necessary.
Non-Operable Inside Mount (D.)
- Measure 3” from each jamb for bracket location. If more
than two brackets came with your order, space
additional brackets evenly between the two and mark
their location.
- Mount brackets using the screws provided. Be sure the
front edges of the brackets are aligned and level to
each other. Shim the brackets if necessary.
3"
3"
3"
3"
3"
3"
3"
3"
C. Outside Mount
D. Inside Mount
INSTALL THE SHADE
Operable - Standard Brackets - (A.)
- Position the shade so cords face you.
- Slip headrail into the installation brackets so the front
of the installation bracket slides under the front groove
on the top of the headrail.
- Gently roll the back of the headrail up and push back
to snap into place.
- Tighten the tab screw.
Operable - Swivel Brackets - (B.)
- Place swivel bracket in the open position.
- Place the headrail against the back of the swivel
brackets.
- Rotate the swivel arm to snap the locking tab under the
headrail.
- Tighten the tab screw.
Non-Operable - Standard Brackets - (C.)
- Loosen the tab screw on each bracket.
- First push the headrail into the brackets and then push
the bottom rail into the brackets. Make sure fabric is
not caught between the tabs and the rails.
- Tighten the tab screw on each bracket. Do not
overtighten. If necessary, gently move the fabric
forward to access the screw.
Non-Operable - Swivel Brackets - (D.)
- Position the moveable tab outward on each bracket.
- With the front side of the fabric facing you, lift the shade
into position so rails are against the back of the brackets.
- Rotate the moveable tabs against the rails to lock into
place. Make sure shade is tightly secured.
Bracket
in Locked
Position
Push
Tab
Bracket
in Open
Position
Screw Holes
Locking
Tab
Tab
Screw
Headrail
Bracket Open Bracket Locked
Locking
Tab
Screw Holes
Push
Tab
Locking Tab
A. B.
C. D.