Lafayette Parasol Accu-Rise Скачать руководство пользователя страница 29

Страница: 29 / 83

Parasol Installation Instructions

BACK

INSTALL THE BRACKETS (cont.)

End Mount

- On the end without the cords, remove the end cap

from the headrail..
- Insert the short end of the specialty end mount bracket

under the small fabric channels in the headrail.
- Replace the end cap and push the bracket and end

cap snugly into the headrail.
- To install the bracket on the cordlock side, pull the

shade cord to the center of the shade to release

the lock, as if lowering the shade.
- Pull the cordlock out 1/2” and insert the short end

of the specialty end mount bracket under the small

fabric channels in the headrail.
- Push the bracket and cordlock snugly back into the

headrail.
- Position the fully lowered shade in the window and

gently push the fabric away from the installation

bracket to allow access to the screw holes.
- Remove the shade with attached end mount brackets

from the window and drill the screw holes.
- Attach the end mount brackets using the screws

provided.

INSTALL THE SHADE

Standard Brackets A.

- Position the shade so the front fabric faces you.
- Slip the headrail into the installation brackets so the

front of the bracket slides under the front groove on the

top of the headrail.
- Gently roll the back of the headrail up and push back

to snap into place.
- Tighten the tab screw snugly. Do not overtighten.

Swivel Brackets B.

- Place the swivel brackets in the open position.
- Place the headrail against the back of the swivel

brackets..
- Rotate the swivel arm to snap the locking tab under

the headrail.
- The shade is locked when the push tab is against the

headrail.

End Cap

Small Fabric Channels

Long Side

( 3/8" Pleat Rail Similar)

3/4" Pleat Rail

Specialty End

Mount Bracket

Bracket

in Locked

Position

Push

Tab

Bracket

in Open

Position

Screw Holes

Locking

Tab

Screw

Headrail

Содержание Parasol Accu-Rise




















































































Результаты поиска

Содержание Parasol Accu-Rise

Отзывы:

Похожие инструкции для Parasol Accu-Rise

Бренды по названию

Популярные бренды

Lafayette Parasol Accu-Rise, Руководство по установке

Результаты поиска

Содержание Parasol Accu-Rise

Отзывы:

Похожие инструкции для Parasol Accu-Rise

Бренды по названию

Популярные бренды