53
24) INFORMATION AND EVENT MEMORY
The digital selector ET-DSEL allows displaying information on automation and accessing events memory, where faults are saved.
After displaying the automatic door work program, press the button
for 5” to enter the information area (Diagram 2).
The buttons inside the information area are used as follows
•
The button ν
allows to go to the following information or event in events memory.
•
The button ^
F2
allows to go to the previous information or event in events memory.
•
The button
F3
is used only if the digital selector ET-DSEL is connected to two automations for the management of two automatic doors
and the symbol in the top right section of the display indicates 1 if the displayed information refers to automation 1, or 2 if it refers to
automation 2. Each time you press the button
F3
, you switch from 1 to 2 and vice versa.
•
If the selector ET-DSEL only manages a single automation, the symbol "1" is displayed on the top right.
•
The button
F1
allows to go to the event memory, to display fault messages; press it again to return to the information area.
•
The button EXIT
allows to return to the main view of the door work program.
DIAGRAM 2
EVENTS MEMORY
INFORMATION AREA
EVENTS MEMORY
INFORMATION AREA
I1, I2, ... = INFORMATION AREA
E1, E2, ... = EVENTS MEMORY
INFORMATION AREA
EVENTS MEMORY
INFORMATION AREA
EVENTS MEMORY
INFORMATION AREA
EVENTS MEMORY
The purpose of the diagram is illustrating the path to be followed to view the information and the events memory; the texts included in the
figures refer to the memory cells appearing on the left side of the display when viewing the information or the faults.
