A
12
35
8
12
English
15 EN
16. Hot water dispensing
Scalding hazard! Use the appropriate
insulating devices (A) to move the water and
steam wands.
The dispensing of hot water is controlled by the economizer
which permits mixing hot water from the boiler with fresh cold
water from the mains and controls its temperature.
With this system, water quality is improved and assures the
best results for the operator.
After having placed an appropriate container under the
dispenser (
8
), proceed in either of the following two ways:
- Press the DOSING BUTTON (
12
) that has the appropriate
memorization.
- For CONTINUOUS dispensing, press the STOP push
button (
35
).
Dispensing, whether for dosed servings or in the continuous
dispensing mode, can be interrupted at any time by pressing
the START-STOP push button (
35
).
NOTE:
-
When using any of the dosing buttons, dispensing
can be interrupted by pressing the STOP button
(35); the memorized data will not be affected.
-
The adjustment of the economizer for regulating
the delivered water temperature is made by the
installing service technician.
Press the
NH\WRFRQ¿UP
7KHVZLWFKHGRIIERLOHULVLGHQWL¿HGZLWKWKHZRUG
OFF
on
the display:
If any dispensing key is pressed of the group with the
disabled boiler, this message appears on the display screen:
22 April 2015
wednesday 15:15:04
88.6°C 90.4°C
22 April 2015
wednesday 15:15:04
GROUP x LOCKED
BOILER OFF
Switching on the boiler takes place in the same way:
• Press
the
“
; key;
•
Press the “STOP/continue coffee” key (
C
) of the group
for which you want to switch on the boiler. The word
ON
will appear in the icon for that group;
• Press
the
NH\WRFRQ¿UP
