COMPONENT MAINTENANCE MANUAL
AVIATION PRODUCTS
Model FA5000
Illustrated Parts List
23–70–30
Use or disclosure of information on this sheet is subject to
the restrictions on the cover page of this document.
Rev. 02 Page 1002
July 21/17
Part numbers are arranged in a alphanumerical sequence beginning at the extreme left–
hand position and continue from left to right, one position at a time. The order to prece-
dence in beginning the part number arrangement is as follows:
A. Letters A through Z (Alphabetical Os are considered as numerical zeros).
B. Numerals 0 through 8.
Part number entry is limited to a single line and does not exceed fifteen characters.
The FIGURE number and ITEM number columns contain the figure and item number(s)
for all parts listed. When more than one figure and item number are shown for the same
part number, the part number is not repeated.
6. DETAIL PARTS LIST
The Detail Parts List consists of illustrations and columnar parts breakdown of the compo-
nent and all assemblies, subassemblies, and parts that can be disassembled, repaired
and reassembled, or replaced. Items that are riveted, welded or spun over are not listed.
Parts made of bulk stock such as wire, tape or bonding braid are also not listed. Illustra-
tions are each assigned a figure number, commencing with Figure 1 and progressing in
sequence.
The FIGURE AND INDEX NUMBER column reflects the assigned figure number of the il-
lustration in which the item is shown and the item number listed on the illustration. Figure
numbers are shown for the first entry of each figure and at the top of each subsequent
column. When there is more than one type of subassembly for the same function addi-
tional figures are included with the same number, but followed by an additional alpha des-
ignator (such as A, B, etc.).
Each part number listed in the Detail Parts List is assigned an index number. Index num-
bers begin with number 1 for each illustration and in broken sequence to facilitate the in-
sertion of new items which are not variants of existing items. Items listed but not illus-
trated are identified by a dash to the left of the index number.
The PART NUMBER column contains the manufacturer’s part number when the part is
purchased from a source other than Aviation Recorders, or the Aviation Recorders part
number for those parts which must be purchased from Aviation Recorders Division.
When the manufacturer’s part number is used for any parts, the Aviation Recorders num-
ber is also shown enclosed in parentheses in the NOMENCLATURE column. When stan-
dard parts (such as MS, AN, RC, CP, etc.) are used, vendor codes are not assigned to
these parts. However, for non–standard parts the vendor code is assigned in the NO-
MENCLATURE column and is preceded by the letter “V.” It corresponds to the Federal
Supply Code for Manufacturers, (FSCM) now known as Commercial and Government En-
tity (CAGE) as listed in Cataloging Handbook H4/H8.
The document reference is online, please check the correspondence between the online documentation and the printed version.
