COMPONENT MAINTENANCE MANUAL
AVIATION PRODUCTS
Model FA5000
Rev. 02 Page 305
Disassembly
23–70–30
Use or disclosure of information on this sheet is subject to
the restrictions on the cover page of this document.
July 21/17
Memory Interface Cable assembly attached to the J
−
3 connector Main Processor
PWA. The CSMU is a sealed unit and must be returned to the factory for repair. If
replacement of the CSMU is required, proceed with the following procedure:
CSMU REMOVAL PROCEDURE
(1) Remove the two screws (1
−
115) used to secure the CSMU cable cover plate
(1-110) and remove cover plate.
(2) Remove the two screws (1
−
130) used to secure CSMU cable (1
−
120) connec-
tor to the MP PWA (1
−
45) and remove CSMU cable connector.
(3) Remove the the four screws (1
−
125) used to secure the CSMU (1
−
120) to the
front chassis (1
−
95).
(4) Remove the CSMU (1
−
120) and carefully guide the CSMU cable thru the slot in
the front chassis (1
−
95).
The document reference is online, please check the correspondence between the online documentation and the printed version.