KYOWA MRS-100 Series Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 81

background image

7

Reference items required when handling the product.

Essential precautions required when handling the product.

LIMITED LIDE PARTS AND PREVENTIVE MAINTENANCE

The product consists of various electronic components and those components, if not all, have a useful life.
Using them exceeding the years specified according to each part type (useful life) may affect the characteristics of the
product, resulting in a malfunction or a failure.

Limited life parts used with the product are as follows.
○Aluminum electrolytic capacitor

The signal-noise ratio will lower due to capacity low or smoke will be emitted due to liquid leak, resulting in a

malfunction of the product.

○ AC adapter (optional accessories)

Heat and smoke will be emitted, resulting in an unstable voltage.

To operate the product normally, finding a sign of the product failure early by daily/periodic inspections and taking the

corrective action are required. For inspection, contact KYOWA or our representatives.

* Limited life parts used with the product are aluminum electrolytic capacitor.

* All components do age and will fail.

MRS-100 Series REPLACEMENT BEFORE THE END OF SERVICE LIFE

Preventive maintenance and replacement parts are a cost-effective way of keeping the performance and extending the
service life of the product. Regardless of the replacement parts, the product itself gradually deteriorates with age. Before
the expected service life is reached, consider replacing the product with a new one or the latest series as preventive
maintenance.

NOTATIONS USED IN THE INSTRUCTION MANUAL

The following notations are used in the Instruction Manual for convenience.

• Names described on the panel surface

Names described on the panel surface are expressed in double quotation mark "

".

• Informational notes

Certain notations are used as necessary to attract your attention to information that requires special care when

handing the product, and to information provided for reference purposes.

Examples of Notations.

NOTE

MEMO

«
...
6
7
8
9
10
...
»

Содержание MRS-100 Series


















































































Отзывы:

Нет отзывов

Похожие инструкции для MRS-100 Series

Бренд: AccuMASTER Страницы: 2

Бренд: ICM Controls Страницы: 8

Бренд: VeEX Страницы: 842

Бренд: National Instruments Страницы: 18

Portable Grand DGX-670

Бренд: Yamaha Страницы: 93

Portatone PSR-410

Бренд: Yamaha Страницы: 65

Бренд: Lasertec Страницы: 21

Бренд: Jenoptik Страницы: 54

Бренд: Dwyer Instruments Страницы: 189

Бренд: Lowrey Страницы: 109

Бренд: E-Mon Страницы: 72

Бренд: Sensia Страницы: 139

Бренд: York Страницы: 2

Бренд: Trebs Страницы: 44

Greenlee CLM-1000

Бренд: Textron Страницы: 36

Бренд: Xtralis Страницы: 13

Бренд: Tektronix Страницы: 124

Бренд: Aktobis Страницы: 7

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды