KYOWA MRS-100 Series, Инструкция по эксплуатации

Страница: 25 / 81

24
a) , b) Bridge input pins (MRS-104A-S, MRS-101A-S/SE) or voltage input pins (MRS-101A-V)
Pins for bridge input (MRS-104A-S, MRS-101A-S/SE) or voltage input (MRS-101A-V).
For connection details, see "3-4.Wiring method of the transmitter."
c) , d) Power input pins
Pins for power input.
For connection details, see "3-4. Wiring method of the transmitter."
Be careful not to use the wrong polarity, as it may damage the product.
e) Adjustment signal pins
Pins required during manufacturing. Not required during use.
Be careful not to short the pins or otherwise use them incorrectly.
f) Screw to fix the Adapter
Screw for affixing the transmitter and Adapter.
For more information on mounting screws, see the following table.
g) Screw hole to fix the Adapter
Screw hole for affixing the transmitter and Adapter.
h) Screw hole to fix the transmitter
Used for affixing the transmitter main unit and Adapter.
For more details on mounting screws, see the following table.
Mounting screws to the transmitter main body
Mounting object
Full-bridge Adapter
Power Adapter
Adapter board
Voltage Adapter
Fixing surface
Screw
Type JCIS10-70 Miniature Screw(M2)
Hexagon socket head cap Screw
(M2.5)
Material SWCH SCM435
Finish Black Trivalent Chromate Black Trivalent Chromate
Size
(mm) (mm)
Max.Torque to
the Transmitter Main Body
0.1N
･
m 0.45N
･
m
Mounting precautions
Exceeding the maximum torque or mounting the transmitter to a warped
or uneven fixing surface may cause damage or cracking on the
transmitter or prevent normal operation.
Fix the transmitter on flat metal surface, etc. by the above mentioned
screw (for Fixing surface) in using it on rotating shafts, moving
obstacles, etc.