Kyocera KM-6230 Скачать руководство пользователя

Страница: 134 / 160

Section 10 TROUBLESHOOTING

2. Replacing the waste toner tank

If “Check waste toner tank.” appears in the message display, replace the waste toner
tank as soon as possible.
* DO NOT replace the waste toner tank unless this message is displayed.

1. If the copier is equipped with the optional Finisher, first detach it from the main body of

the copier.

2. Open the waste toner tank cover.

3. Remove the waste toner tank.

4. Close the opening of the waste toner tank with the attached seal.

IMPORTANT!
• Waste toner is NOT reusable.
• Give the old waste toner tank to the service representative for your copier.

CAUTION

Do not incinerate toner and toner containers. Dangerous sparks may cause
burns.

5. Set the new waste toner tank.
6. Close the waste toner tank cover and, if the copier is equipped with the optional

Finisher, reattach it to the copier.

10-3

Содержание KM-6230

































































































































































Результаты поиска

Содержание KM-6230

Отзывы:

Похожие инструкции для KM-6230

Бренды по названию

Популярные бренды

Kyocera KM-6230, Инструкция по эксплуатации

Результаты поиска

Содержание KM-6230

Отзывы:

Похожие инструкции для KM-6230

Бренды по названию

Популярные бренды