Kyocera Mita DC-2060, Руководство по обслуживанию

Страница: 77 / 437

1AH
1-3-53
A When the print key is pressed, the drive motor (DM) comes on and 100 ms later, the
lower paper feed clutch (PFCL-L) comes on and the rear side copying starts.
B The registration clutch (RCL) comes on and secondary paper feed starts, then 1111 ms
later, the feed shift solenoid (FSSOL) comes on, the conveying shift guide operates, and
the paper path is switched.
C When the eject switch (ESW) comes on, the side registration motor (SRM) comes on
for 135 steps and the side registration guide moves to the paper size position.
D When the feedshift switch (FSSW) comes on, the side registration motor (SRM) comes
on for 12 steps and the side registration guide moves to the paper stock position.
E 104 ms after the feedshift switch (FSSW) goes off, the side registration motor (SRM)
comes on for 12 steps, paper side registration is carried out and at the same time, the
duplex paper tapping solenoid (DUPPTSOL) comes on, the duplex paper tapping guide
descends, and the trailing edge for the stocking paper is held.
F
191 ms after the duplex paper tapping solenoid (DUPPTSOL) comes on, the duplex
forwarding solenoid (DUPFWDSOL) and the refeed clutch (RFCL) come on, the duplex
forwarding pulley operates, and the leading edge of the stocked paper is aligned.
G 127 ms after the stock switch (STKSW) comes on, the duplex paper tapping solenoid
(DUPPTSOL), the duplex forward solenoid (DUPFWDSOL), and the refeed clutch
(RFCL) go off and the copier goes on standby for front side copying.