54-0208-01
4.5
Completing the Installation
Step
Page #
Done?
If you routed the antenna cable through the roof, you used the
2.12
supplied fitting and backing plate and sealed the holes.
You did not disconnect the two short cables pre-connected on the
3.3
receiver’s rear panel.
If you cut the antenna cable, you used an LRC/Augat IT1000 tool
3.5
to attach the supplied F-connector to the end of the cable.
You connected the antenna cable to the receiver.
3.7
You connected the RF-to-IR converter to the receiver and placed it
3.8
3 feet away from the receiver. (Or you connected an existing IR input to
the receiver via the optional adapter cable.)
You connected the audio/video cables from the receiver to the
3.9
vehicle’s entertainment system.
You connected the receiver’s power cable to switched (accessory)
3.11
power.
You mounted the receiver in a dry location away from any heat sources
3.12
and allowing plenty of room for ventilation.
You installed two “AAA”-size batteries in the remote control.
4.3
Receiver Location:
Содержание TracVision A5
Страница 1: ......
