54-0208-01
3.9
Installing the Receiver
Connecting the Audio/Video Cables
The TracVision A5 kitpack includes standard
audio/video (A/V) cables with RCA-type connectors
for connecting the receiver to the vehicle’s
entertainment system. However, the receiver’s rear
panel also offers an S-video jack and a composite
video jack, if needed. Follow the procedure below for
your particular installation. If you need to connect a
VCR or DVD player to the vehicle’s entertainment
system, see the alternate wiring instructions in the
next section,
“Connecting a VCR or DVD Player.”
Option 1 - RCA-type A/V Jacks
(very good picture
quality)
Option 2 - S-Video Jack
(best picture quality)
Option 3 - RF Coaxial Connector
(good picture
quality)
Option 1 - RCA-type A/V Jacks
(very good picture quality)
If the vehicle’s entertainment system has standard
RCA-type A/V jacks, follow the steps below.
1.
Connect the supplied audio/video cables to the
lower “Audio R,” “Audio L,” and “Video” jacks
on the receiver’s rear panel.
2.
Connect the other ends of the audio/video cables
to the
entertainment system
’s audio and video
inputs.
If the system has only one audio input jack,
connect the audio cable that is connected to the
receiver’s “Audio L” jack.
Option 2 - S-Video Jack
(best picture quality)
If the vehicle’s entertainment system has a high-
quality S-Video jack, follow the steps below.
1.
Connect an S-Video cable
(not supplied)
to the
“S-Video” jack on the receiver’s rear panel.
2.
Connect the other end of the S-Video cable to the
entertainment system
’s S-Video input.
Содержание TracVision A5
Страница 1: ......
