KVH Industries TracVision A5, Руководство по установке

Страница: 4 / 78

1
TracVision A5 Installation Guide – ADDENDUM
54-0208-01 Addendum to Rev. C
TracVision A5 Installation
Guide Addendum
ECO #6705
The following information applies to Revision C of the
TracVision A5 Installation Guide (KVH Part Number 54-0208-01).
When you start up the TracVision antenna, do not move the
vehicle for 20 seconds. This allows the antenna gyros to initialize
properly, ensuring optimum satellite tracking performance.
4-3 Testing the System
Now all you need to do is turn the system on and ensure
everything works properly. Follow the steps below to turn on the
TracVision A5 system and verify proper operation.
1. Ensure that the antenna has a clear view of the
satellite. The antenna requires an unobstructed
view of the southern sky to receive satellite TV
signals. Trees, buildings, highway overpasses, etc.,
can block satellite signals. Heavy rain or snow
may also interrupt satellite signals. For complete
details about satellite reception requirements, refer
to
Section 1.3, “Receiving Satellite TV Signals,” in the
TracVision A5 User’s Guide .
2. Apply vehicle power and turn on the vehicle’s
entertainment system.
3. Turn on the TracVision A5 receiver’s front panel
power switch. The switch’s light illuminates and
the receiver beeps twice.
4. Wait 30 seconds. The antenna should then power
off and the receiver should beep once.
Since the TracVision antenna requires an unobstructed
view of the southern sky to receive satellite signals, the
system will not work when the vehicle is in a garage.
Receiver Front Panel Power Switch
Power Switch