1
TracVision A5 Installation Guide – ADDENDUM
54-0208-01 Addendum to Rev. C
TracVision A5 Installation
Guide Addendum
ECO #6423
The following information applies to Revision C of the
TracVision A5 Installation Guide
(KVH Part Number 54-0208-01).
Rubber Cushions All Black
All
of the rubber cushions provided with the TracVision A5 are
black in color. The level rubber cushions (described in step 5 of
Section 2-1, “Mounting the Antenna to the Vehicle’s Roof,” on
page 2.5
) are black, not gray, in color.
New Antenna Mounting Hardware
The
1
⁄
4
"-20 x 2
1
⁄
2
" tamper-resistant screws provided in the
TracVision A5 kitpack differ from those described in the manual.
They have a Snake Eyes
®
head instead of a TORX
®
head. The
kitpack also includes a Snake Eyes bit for tightening these screws.
New part numbers are noted below.
Part
Part #
Qty.
1
⁄
4
"-20 x 2
1
⁄
2
" Snake Eyes screws
14-0373-40
8
Tamper-proof Snake Eyes bit
14-0379
1
The Snake Eyes screws are only necessary if you need to install a
spacer underneath each antenna mounting bracket, as described
in step 6 of
Section 2-1, “Mounting the Antenna to the Vehicle’s
Roof,” on page 2.6
. Steps 8 and 9 of
Section 2-1
are superseded by
the information on the following pages.
Snake Eyes
Screw Head
Содержание TracVision A5
Страница 1: ......
