54-0208-01
3.8
TracVision A5 Installation Guide
Connecting the RF-to-IR Converter Cable
The RF-to-IR converter’s “Y” cable supplies 8 VDC
power to the converter and relays remote control
signals to the receiver. To connect the cable, follow
the steps below.
1.
Connect the forked
end of the cable to
the RF-to-IR
converter’s rear
panel jacks.
2.
Connect the other end of the cable to the “Remote
IR Input” jack on the receiver’s rear panel.
3.
Place the RF-to-IR converter at least three feet
away from the receiver’s location.
Connecting an Existing IR Input
(Optional)
If you prefer, instead of the RF-to-IR converter, you
can connect an existing IR input (such as a TV
screen’s IR eye) to the receiver.
1.
Connect the desired
IR input to the
adapter cable
(not
supplied – order from
KVH)
.
2.
Connect the other
end of the adapter
cable to the
“Remote IR Input”
jack on the
receiver’s rear
panel.
RF-to-IR Converter Rear Panel
Receiver
VEHICLE POWER
(10-16 VDC)
REMOTE
IR INPUT
To Vehicle's
IR System
Vehicle IR Adapter Cable
(Not Supplied)
If you choose this option, you will need to
aim the remote control at the IR eye
whenever you use the remote control. The
receiver will not be able to receive RF
signals from the remote control.
The RF-to-IR converter MUST be placed at
least three feet away from the receiver.
Placing the RF-to-IR converter closer to the
receiver may result in IR interference,
causing the remote control to operate
intermittently or not at all.
Содержание TracVision A5
Страница 1: ......
