3.
Choose a location on the roof for the
1
⁄
2
"-diameter
cable access hole. Inside the vehicle, remove the
headliner to access the underside of the roof
where you will be cutting out the hole.
4.
Using a
1
⁄
2
" hole saw, cut out the cable access hole
in the vehicle’s roof and smooth the edges of the
hole to protect the cable.
5.
Center the backing plate over the cable access
hole to locate the three fitting mounting holes.
Use a center punch to mark the hole locations.
6.
Set aside the backing plate, then use a
5
⁄
32
" drill bit
to drill the three fitting mounting holes.
54-0208-01
2.11
Installing the Antenna
Locating the Fitting Mounting Holes
Backing Plate
(used as template)
Techniques for removing the headliner vary
from vehicle to vehicle. Only a trained
automotive installer should remove the
headliner. KVH is not liable for damage
caused by improper headliner removal.
1
⁄
2
" Cable
Access Hole
5
⁄
32
" Fitting
Mounting Hole
Cable Access Hole and Fitting Mounting Holes
Содержание TracVision A5
Страница 1: ......
