2.
Connect the VCR/DVD player to the vehicle’s
entertainment system
:
If the
entertainment system
and VCR have RCA-
type A/V connectors:
Connect a set of audio/video cables from the
VCR’s audio and video output jacks to the
entertainment system
’s audio and video inputs.
If the
entertainment system
or VCR only has an
RF (coaxial) connector:
Connect an RF cable from the VCR’s VHF/UHF
or RF output jack to the
entertainment system
’s
VHF/UHF or RF input.
Connecting a VHF Antenna
(Optional)
If you need to connect an existing VHF antenna to the
vehicle’s TracVision-equipped entertainment system,
simply connect the cable to the receiver’s “VHF
Antenna In” jack.
Connecting the Power Cable
Now that you’ve connected all other cables to the
receiver, follow the steps below to connect the power
cable.
1.
Ensure that vehicle power is turned off.
2.
Disconnect vehicle power by either removing the
positive lead from the vehicle’s battery or
removing the appropriate vehicle fuse.
3.
Connect the receiver’s power cable to the
vehicle’s switched (accessory) power via the fuse
box. Connect the red wire to the +12 VDC supply;
connect the black wire to ground.
DO NOT
connect the system directly to the vehicle’s
battery – the TracVision system will drain the
battery.
54-0208-01
3.11
Installing the Receiver
Before connecting the receiver power cable,
be sure that vehicle power is turned off and
power is disconnected from the circuit.
Содержание TracVision A5
Страница 1: ......
