Preparing for operation
47
Working depth
The working depth of the power harrow is set by limiting the movement
of the packer roller in relation to the power harrow.
The position of the side plates and levelling bar must be adapted to
the selected working depth of the power harrow.
Configure the settings carefully in order to achieve optimal work
results and low power consumption while preventing unnecessary
wear and damage.
After initial coarse tuning, carry out fine adjustment on the field. The
penetration depth of the packer roller in the ground depends on the soil
condition and therefore influences the working depth.
Always perform the adjustment work for all of the depth settings
described below on both sides of the machine.
The power harrow is equipped with one of the listed depth settings:
•
Standard connection
•
MC connection [+]
