Fault elimination
108
Leakage of grease at the tine
supports
Damage to seals by foreign bodies
Replace the damaged seals
Dam formation at device sides
Damage to side plates during use
Align or replace the damaged parts
Strong vibrations
Side plate damaged
Replace the side plate
Levelling bar damaged
Replace the levelling bar
Track eradicator damaged
Replace the track eradicator
Tine support bearings are worn
Have the bearings replaced in a
specialist workshop
Foreign bodies have become caught
in the tine supports
Remove foreign bodies
Packer roller scrapers are worn
Setting the scraper
PTO drive speed is not correct
Set the correct drive speed at the
PTO
The work result is inadequate
The working speed is too high
Reduce the driving speed
The working depth of the
accessories is too deep or too
shallow
Set the correct working depth
Dam formation
Set the correct working depth
Packer roller blocked
Inadequate lubrication of the bearing
Lubricate bearings
Bearings are worn
Replace the bearings
The packer roller or bearings have
deformed
Replace the roller or bearings
Fault
Cause
Remedy
