HR4004D-4504D
42
6. - Putting into service
KN208JGB_C
Power harrow
Never operate the PTO shaft at an angle X
exceeding 30°.
To avoid serious accidents, the PTO drive
shaft guards must be properly in place and
fixed with the chains provided.
- Attach PTO shaft guard chain in hole (1) on
machine side.
- Immediately replace any worn or damaged
guard.
6.1.5 Cam type cut-out clutch
The PTO shaft is factory fitted with a cam type cut-
out clutch.
- Check that cut-out clutch disengages during the
first period of use:
• If the cam type cut-out clutch disengages too
frequently, the adjustment is too light.
X
X
1
