10. - Maintenance and storage
HR4004D-4504D
99
KN208JGB_C
Power harrow
- Replace side deflectors (1) and anti-ridging plates
(2) when measure L reaches: 20 mm (0.79’’).
Side deflector replacement
-
Before leaving the tractor or before
adjusting, maintaining or repairing the
machine, disengage the PTO drive, turn off
the engine, remove ignition key and wait
until all moving parts have come to a
complete stop and apply park brake.
-
Remove screws and nuts (1). Replace if
necessary.
- Replacing the side deflectors and anti-ridging
plates.
- Reinstall bolts and nuts (1):
• Torque: 8.5 daNm (62.5 lbf ft).
10.4.4 Oil seal replacement
- Before removing the blade holder, mark its
initial direction to ensure it is refitted
correctly.
- Never remove several blade holders at the
same time.
L
1
2
1
